Friday, December 31, 2010

Bentwood Products Manufacturing

Bentwood products manufacturing company is located in Dublin, Ohio. They are a private company owned and operated by Moldings, Architectural: Plaster of Paris. The company was founded in 1989 and currently is estimated to have annual revenue of $490,000. They manufacture various nonmetallic mineral products. Some of these products include vacuum moldings, reacting injection moldings, and blow moldings.

They also manufacture lumber and wood products. These products include furniture such as wooden chairs, dining chairs, stools, tables, and bed frames. The furniture is created by steaming the wood and then bending it into the correct shape or pattern. The wood is then left to harden for an extended period of time. This is a popular technique for furniture frames made with heavy cane. The company falls under the category of Millwork Contractors and is only one of two companies in the Dublin area. Their company rating for their service is average and good. 

Wednesday, December 29, 2010

Zep Manufacturing Company MSDS

Zep is a company that manufactures a large selection of cleaning products for industrial use. The company was founded in 1937 in Atlanta, Georgia. Its reach has now spread into every major city in the United States and has even globally expanded onto five continents. The Zep name is carried on more than 3,500 products of superior quality. Some of these products include hand cleaners, detergents, floor finishes, disinfectants, and deodorants.

Zep also has a complete line of products specifically designed for professional use. These products are available to a wide variety of industries such as government, institutional, automotive, food processing, and hospitality. Zep manufacturing company msds information can be found on their website www.zep.com. MSDS contains information regarding the properties of each product produced by ZEP. It describes how each product should be handled or worked with. MSDS information is searchable by product number and is available in French (Canadian), English (Canadian), English, and Spanish. 

Tuesday, December 28, 2010

Adhesive Spray Tip Plywood Manufacturing

Working with adhesive sprays can be confusing and also very messy. These sprays can be used to glue pieces of plywood together. It is important that the spray tip has no obstructions since this can cause many problems. The adhesive sprays should be used at room temperature in a well ventilated area. Keep a good distance between you and the surface to avoid extended drying times. Hold the spray can vertically instead of horizontally.

Adhesive spray tip plywood manufacturing companies have used the conventional adhesive mixtures for soft plywood. No mixtures have been altered to glue southern pine plywood together. It is important to wait at least 30 seconds before attaching the pieces of plywood together. This improves the strength of the bond by allowing the solvents to evaporate fully. Place the spray tip 2 to 3 inches away from the surface of the project to protect it from overspray. Remember to keep the spray tip nozzle to use as replacements for spray adhesives that get clogged. 

Monday, December 27, 2010

Sonar Fish Finders Manufacturing

Fishfinders operate using sonar technology. Sonar technology uses sound waves to locate objectes underwater. The fishfinder works by sending out a sound wave into the water in a cone shape. If something is located inside this beam of sound a signal is sent back to the fishfinder. By calculating the amount of time between when the sound wave is sent out and when the signal is heard, you can measure how far the object is from your boat.

Sonar fish finders manufacturing began in 1957. It was designed by a man named Carl Lowrance and instantly became popular all over the globe. He came up with the idea after scuba diving with his sons. They noticed that fish migrate to favorable places when the weather changed, and they wanted to create a machine that could detect fish individually instead of as a group. Due to high production costs it was discontinued in 1984 after selling over one million units. 

Wednesday, December 22, 2010

3p Process And Lean Manufacturing

Lean manufacturing is a practice of production that uses only the resources required for production to eliminate waste. Waste refers to any activity that does not benefit the outcome of the final product. Examples of waste include waiting time, inventory, processing, and over-production. The goal of lean manufacturing is to produce more efficiency by optimizing work flow. By eliminating wastes costs are reduced and quality is improved. The outcome is a better product for a lower cost.

3p process and lean manufacturing is seen as one of the most powerful manufacturing tools. 3P is primarily used by companies who have already had lean manufacturing experience. 3P stands for Production Preparation Process and it focuses on eliminating waste through the design process only. Companies test different design processes to find the one that requires the least amount of material, capital resources, and time. Companies that use the 3P process will have products that are simple and easy to manufacture. The products will also be easier to maintain and use by consumers. 

Tuesday, December 21, 2010

tampion guns manufacturing

Tampions are plugs made to cover the muzzle of a gun in order to keep out moisture and dust. The tampion guns manufacturing companies usually make tampions out of rubber, plastic, metal, wood, or canvas. Tampions can be found on land and naval guns with the naval ones being more intricate. Due to their exposure to water the naval guns had to be protected by wooden and rubber plugs. The rubber and plastic tampions are normally only shot in case of an emergency. The advantage of plastic tampions was that they could handle the pressure build up in the barrel during the first shot.

As time passed tampions became collector’s items due to their designs. They were embossed and engraved with the arms of their unit. Currently even warships that do not carry guns have tampions with their badges engraved on them. Tampions were also used to cover the muzzle of cannons. 

Friday, December 17, 2010

Curettes General Orthopedic Manufacturing Companies

Scalpels are not the only tools used by surgeons. Curettes are small instruments used to remove tissue or debris from different body cavities during medical procedures. Curettes are standard tools that many doctors and surgeons need to perform operations successfully. They have a handle at one end and the other end has a prong that ends with a hook or gouge. Curettes come in an assortment of sizes and can be either straight or angled in shape. The shape of a curette can be compared to a scoop or a spoon.

When you are looking to purchase medical curettes it is important to purchase them from a company you can trust. Some curettes general orthopedic manufacturing companies include: Whitney Curettes, Amaax International, and Burn Bone Curettes. It is important that the companies manufacture the curettes with the finest materials and craftsmanship. These tools should be high in quality since they are used in life or death situations. Curettes should be technologically advanced and extremely precise. 

Thursday, December 16, 2010

Danaher Corporation Lean Manufacturing

Danaher is a leader in the technology field that designs and manufactures new and advanced products to various clients around the globe. Their products cover the most demanding applications internationally and create endless possibilities for their users. The idea for the company was created on a fishing trip on the Danaher River in Montana. The founders wanted to create a manufacturing company that was focused on customer satisfaction.

The Danaher corporation lean manufacturing process is referred to as the Danaher Business System (DBS). This system is the driving force behind every aspect of Danaher. It serves as a guide for the company and helps to create new ideas on how they can improve themselves. The Danaher Business System has changed from a collection of manufacturing tools into a philosophy that clearly defines what the Danaher Corporation is all about. The Danaher Business System is the process that offers quality, cost, innovation, and delivery to the consumer resulting in superior performance

Wednesday, December 15, 2010

Waterless Hand Soaps Manufacturing

Waterless hand soaps are available for hand washing in a gel or foam form. These hand washes allow you to wash your hands using an alcohol based product without any water. The gel dries faster than the foam and irritates and dries the skin less. After making contact with your hands for 15 seconds either of these products can destroy 99.9% of germs. These products are very convenient when soap and water are unavailable such as during camping, fishing, or traveling.

The waterless hand soaps manufacturing process is comprised mainly of one active ingredient – ethyl alcohol. Ethyl alcohol is also found in alcoholic beverages such as wine and beer. The hand washes are primarily made up of ethyl alcohol but they may contain additional ingredients such as isopropyl alcohol, propylene glycol, and moisturizers. These ingredients are referred to as inactive ingredients. Waterless hand soaps are generally not tested on animals and do not contain any animal products. They must also meet specific requirements of the FDA. 

Monday, December 13, 2010

Phonocardiographs Manufacturing

A phonocardiograph is an electroacoustic machine that helps record the sounds and murmurs of the heart. There is little noise and distortion and you can audio monitor with the built-in speaker. Operating a phonocardiograph is very simple. You place the electronic sensor onto the patient’s chest. The selectors then have to be adjusted depending on what pitch and intensity the user desires. The sounds of the heart will be played through the built-in speaker. The flashing LED indicator also provides audio-visual indication.

The phonocardiographs manufacturing of sound is very simple. It is just made up of a system of microphones, amplifiers, and recording devices. The microphones are connected to filters that allow both low and high frequency sounds to be recorded. The user will also use audiphones to ensure that a clear accurate recording has been made. Phonocardiographs are often used to diagnose and monitor heart conditions. The technique that creates a graphic record of the heart is known as phonocardiography. 

Friday, December 10, 2010

The Zipper Carnival Rides Manufacturing

The Zipper is popular ride found at amusement parks and carnivals. It is a very unpredictable ride that spins around numerous times. It was invented in 1968 for a company called Chance Rides, Inc., by Joseph Brown. More than 200 units of the Zipper have been manufactured since then and can now only be ordered per customer request.

Since its creation the zipper carnival rides manufacturing process has hardly changed. Not much has been done to the original design since the ride is very simplistic. A majority of Zipper machines follow a basic design pattern. They all have a long boom with a cable wrapped around it that pulls 12 cars in a circular motion around the ride. It can be disassembled like most other carnival rides so that it can be easily moved around to different places. Ironically, the ride is described as an instrument used to inflict torture, but it still maintains a strong fan base filled with adventurous thrill seekers.

Wednesday, December 8, 2010

Fiat-Chrysler Computer Aided Manufacturing

Computer aided manufacturing, also known as CAM, is the process of controlling manufacturing machinery with computer software. The main objective of computer aided manufacturing is to create consistent products and speed up production time. CAM is categorized as a numerical control programming tool. Computer aided manufacturing does not mean the elimination of the need for skilled workers. CAM just helps to assist the worker in doing the job more effectively.

Commercial use for CAM began in automotive companies. The fiat-chrysler computer aided manufacturing program is one example of an automotive company that currently uses CAM. Chrysler suppliers were using a program called CATIA for over 20 years and have now recently switched to Fiat. The downside of CAM is that it cannot reason and comprehend like human beings can. Computer aided manufacturing is evolving and the software is becoming more difficult to grasp for the average worker. The skill set needed to run CAM software is extensive and currently there is a shortage of qualified machinists in America. 

Tuesday, December 7, 2010

Paperless Manufacturing CAD Software for Siemens

CAD stands for computer-aided design, which is the use of computer programs to construct graphic 2D or 3D representations of actual physical objects. Computer-aided design is largely used for computer animations and is generally used in movies and advertisements.  Computer-aided design can also be used to create actual physical products for various industries. There are many advantages to using computer-aided design such as improved quality of product, quicker time-to-market, and lower costs for product development.

There is a variety of paperless manufacturing cad software for siemens.  The examples of software applications include NX, Solid Edge, Parasolid, and D-Cubed Components. NX allows companies to use the leading practices of CAD by saving and recycling product knowledge. Solid Edge uses advanced technology that allows for faster design and change. It makes the complex of product design easier. Parasolid allows users to make complex pieces and assemblies. D-Cubed Components offer a wide array of features such as clearance measurement, sketching, hidden line visualization, motion simulation, part design, and collision detection. 

Monday, December 6, 2010

Chelant Manufacturing Companies

Chelants, or chelating agents, are products used in many different categories such as food processing, agriculture, paper manufacturing, textiles manufacturing, dyeing, and water treatment. Chelants are found in everyday items such as laundry detergent and shampoo. Chelation can also be found in nature, geology, biochemistry, and microbiology. Chelants include compounds that all have the ability to coordinate with metal ions at two or more sites. This reduces the effects the metals would have had on the items they are being used on.

Complexes made up of chelated ions must be registered if they are created by chelant manufacturing companies. The chleating agent itself must always be registered but the substance generated after the reactions are not. Any substance created as a result of a chemical reaction when the agent works as intended will be exempt from registration. This is only if it is not manufactured, placed on the market, or imported. 

Saturday, November 20, 2010

Oracle Databases Adobe pdf Searching

One of my favorite activities is to uses Oracle databases for adobe pdf searching.  This is a great way to quickly find archived data that a specific branch of my company needs.  Here are two ways to make indexing easier.

Naming Convention of PDF
It is important to save files under a specific naming convention that will allow people to quickly find pdfs based on search words.  Group one high level word with the specific title of the pdf.

Content on PDF
For documents that may be more numbers than words, it is important to include a title and description for each area of the PDF.  This is especially useful for accounting and bookkeeping documents.

Advantages and Disadvantages of Oracle Database

When it comes to breaking down the advantages and disadvantages of Oracle database you have to start with the fact that Oracle is the world's largest enterprise software company.  Larry Ellison founded this company on certain principles and he has continued to be the market leader by abiding by them.

One of the main advantages is reliability and adequacy of the database upon four major elements.

Atomicity
For the results of a specific transaction the execution ais either all engaged or retracted.

Isolation
The transactional results are not visisble to other transacts until the transaction is finished.

Consistency
Databases goes from one valid state to another valid state.

Durability
Results of a transaction have permanence.

Oracle continues to acquire other competing companies that accel specific areas to improve on its products.  That is another major advantage.

VMware Oracle Application Server

Oracle's VMware division is known for their application server.  It is a great way to accelerate e-business.  The deployment of the e-business suite on the VMware infrastructure is one of the key aspects that separates this product from its competitiors.

Here is a great link that has a white paper and multiple deployment guides:
http://vmware.com/solutions/partners/alliances/oracle-applications.html

This should really help everyone get a better grasp of what the VMware Oracle application server can do for their respective businesses.

Microsoft ODBC Driver for Oracle Download

I have been getting a lot of requests for the location of the "Microsoft ODBC Driver for Oracle Download." 

Here's the location of the download:
Download Link

Here's the description from the page:
The ODBC .NET Data Provider is an add-on component to the .NET Framework. It provides access to native ODBC drivers the same way the OLE DB .NET Data Provider provides access to native OLE DB providers. The ODBC .NET Data Provider is intended to work with all compliant ODBC drivers but only the following drivers have been tested with the ODBC .NET Data Provider:
  • Microsoft SQL ODBC Driver
  • Microsoft ODBC Driver for Oracle
  • Microsoft Jet ODBC Driver